cisco — Configuring VRF-Aware Services for Syslog

Configuring VRF-Aware RADIUS To configure VRF-Aware RADIUS, you must first enable AAA on a RADIUS server. The switch supports the ip vrf forwarding vrf-name server-group configuration and the ip radius source-interface global configuration commands, as described in the Per VRF AAA Feature Guide . Configuring VRF-Aware Services for Syslog Procedure Configuring Multi-VRF CE Configuring VRF-Aware RADIUS Command or Action Purpose Device(config-if)#ip address 10.1.5.1 Step 7 ip verify unicast reverse-path Example: Device(config-if)#ip verify unicast reverse-path Enables uRPF on the interface. Step 8 end Example: Device(config-if)#end Returns to privileged EXEC mode.

Command or Action Purpose Step 1 enable Example: Device>enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal Example: Device#configure terminal Enters global configuration mode. Step 3 logging on Example: Device(config)#logging on Enables or temporarily disables logging of storage router event message. Step 4 logging host ip-address vrf vrf-name Example: Specifies the host address of the syslog server where logging messages are to be sent. Configuring Multi-VRF CE 17