Configuring RADIUS Authorization for User Privileged Access and Network Services Authorization is bypassed for authenticated users who log in through the CLI even if authorization has been configured. Note Follow these steps to configure RADIUS authorization for user priviledged access and network services: Procedure Configuring RADIUS Configuring RADIUS Authorization for User Privileged Access and Network Services Command or Action Purpose Device(config-sg-radius)# server name ISE Step 9 end Example: Device(config-sg-radius)# end Exits RADIUS server group configuration mode and returns to privileged EXEC mode. Command or Action Purpose Step 1 enable Example:
Device> enable Enables privileged EXEC mode. Enter your password, if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 aaa authorization network authorization-list radius Example: Device(config)# aaa authorization network list1 radius Configures the device for user RADIUS authorization for all network-related service requests. Step 4 aaa authorization exec authorization-list radius Example: Device(config)# aaa authorization exec list1 radius Configures the device for user RADIUS authorization if the user has privileged EXEC access. The exec keyword might return user profile information (such as autocommand information).
Step 5 end Example: Device(config)# end Exits global configuration mode and returns to privileged EXEC mode. Configuring RADIUS 30