cisco — Configuring Settings for All RADIUS Servers

What to do next You can use the aaa authorization global configuration command with the radius keyword to set parameters that restrict a user’s network access to privileged EXEC mode. The aaa authorization exec radius local command sets these authorization parameters: • Use RADIUS for privileged EXEC access authorization if authentication was performed by using RADIUS. • Use the local database if authentication was not performed by using RADIUS. Starting RADIUS Accounting Follow these steps to start RADIUS accounting: Procedure Configuring Settings for All RADIUS Servers Beginning in privileged EXEC mode, follow these steps to configure settings for all RADIUS servers:

Configuring RADIUS Starting RADIUS Accounting Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password, if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 aaa accounting network accounting-liststart-stop radius Example: Device(config)# aaa accounting network start-stop radius Enables RADIUS accounting for all network-related service requests. Step 4 aaa accounting exec accounting-liststart-stop radius Example:

Device(config)# aaa accounting exec acc-list start-stop radius Enables RADIUS accounting to send a start-record accounting notice at the beginning of a privileged EXEC process and a stop-record at the end. Step 5 end Example: Device(config)# end Exits global configuration mode and returns to privileged EXEC mode. Configuring RADIUS 31