Procedure ConfiguringtheDeviceforVendor-Proprietary RADIUSServerCommunication Follow these steps to configure vendor-proprietary RADIUS server communication: Procedure Configuring RADIUS Configuring the Device for Vendor-Proprietary RADIUS Server Communication Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password, if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 radius-server vsa send [accounting | authentication] Example: Device(config)# radius-server vsa send accounting Enables the device to recognize and use VSAs as defined by RADIUS IETF attribute 26.
• (Optional) Use the accounting keyword to limit the set of recognized vendor-specific attributes to only accounting attributes. • (Optional) Use the authentication keyword to limit the set of recognized vendor-specific attributes to only authentication attributes. If you enter this command without keywords, both accounting and authentication vendor-specific attributes are used. Step 4 end Example: Device(config)# end Exits global configuration mode and enters privileged EXEC mode. Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password, if prompted. Step 2 configure terminal Example:
Device# configure terminal Enters global configuration mode. Configuring RADIUS 33