Controller_NA_Practice_Guide_IAG_Library_to_Visualize_Integration_of_Control_and_Safety_EN_202004_V4

Programmable Terminal NA Series Practice Guide IAG Library to Visualize Integration of Control and Safety NA5-15□101□ NA5-12□101□ NA5-9□001□ NA5-7□001□ V448I-E3-03

Page 1

■ Introduction This guide provides the reference information when creating and using IAG objects. It does not provide safety information. Be sure to obtain manuals for NA series programmable terminals, to read the safety and other information necessary to use, and to test the equipment sufficiently before actual use. 2

Page 2

(4) Omron may discontinue the production of Omron products or change the specifications of them for the purpose of improving such products or other reasons entirely at its own discretion.

Terms and Conditions Agreements Thank you for your usage of products of Omron Corporation (Omron). These terms and conditions shall be applied to all transactions regardless of who sells if there is no special agreement on the products. ⚫ Definitions of Terms - Omron product(s): Omron branded Factory Automation (FA) system equipment, general-purpose control devices, sensors, and electronic/mechanism components. - Catalogues: Omron general catalogue "BEST", electronic/mechanism components general catalogue and other catalogues, specifications, instructions and manuals of Omron products, including electronically provided information available on the Omron electronic - Usage conditions:

Usage conditions, rating, performance, operating environment, handling components information website, etc. instructions, cautions, prohibited use, etc. of Omron products described in specifications, documentations or manuals. - Customers application(s): Application of Omron products by customers which include embedding and/or using Omron products in their parts/components, electronic substrates, devices, equipment or systems manufactured by customers. - Fitness: (a)Fitness, (b)performance, (c) non-infringement of third-party intellectual property, (d) compliance with laws and regulations and (e)conformity to various standards.

⚫ Note about Descriptions Attention is required to the following points for information obtained from catalogues. (1) Rated values and performance values are results of tests performed for separate single condition, including but not limited to temperature and humidity. Omron does not warrant rated values and performance values for multiple combined conditions. (2) Reference data are provided for reference only. Omron does NOT warrant that Omron products work properly at all times in the range of reference data. (3) Application examples are provided for reference only.

Omron does NOT warrant the (4) Omron may discontinue the production of Omron products or change the specifications fitness of Omron products under such applications. of them for the purpose of improving such products or other reasons entirely at its own discretion. 3

Page 3

(c) Applications under severe condition or in severe environment, including but not limited to outdoor equipment, equipment exposed to chemical contamination, equipment exposed to electromagnetic interference and equipment exposed to vibration and sho...

⚫ Note about Use Please be aware of and accept the following when you introduce or use Omron products: (1) Please use Omron products in compliance with usage conditions including rating and performance limits. (2) Please confirm the fitness of Omron products in your application and use your own judgment to determine the appropriateness of using them in such application. Omron shall not warrant the fitness of Omron products in customer applications. (3) Please confirm in advance that Omron products are properly wired and installed for their intended use in your overall system.

(4) When using Omron products, please make sure to (i) maintain a margin of safety between the published rated and performance values, and the application requirements, (ii) design to minimize risks to customer application in case of failure of Omron products, such as introducing redundancy, (iii) introduce system-wide safety measures to notify risks to users, and (iv) conduct regular maintenance on Omron products and customer application.

(5) Omron assumes no responsibility for any direct or indirect loss, damage and expense resulting from infection of our products, installed software, any computer devices, - DDoS attack (distributed DoS attack), computer programs, network, and databases with the followings: - Computer virus and other technically harmful program, and - Unauthorized access. Please conduct the followings by yourself: (i) antivirus software install, (ii) data input/output, (iii) lost data recovery, ( ⅳ ) protections against computer virus that contaminate Omron products or the installed software, and ( ⅴ ) measures to protect Omron products from unauthorized access.

(6) Omron products are designed and manufactured as general-purpose products for use in general industrial applications. They are not intended to be used in the following critical applications. If you use Omron products in the following applications, Omron shall not provide any warranty for such Omron products, unless otherwise specifically agreed or unless the specific applications are intended by Omron.

(a) Applications with stringent safety requirements, including but not limited to nuclear power control equipment, combustion equipment, aerospace equipment, railway equipment, elevator/lift equipment, amusement equipment, medical equipment, safety devices and other applications that could cause danger/harm to human body and life. (b) Applications that require high reliability, including but not limited to supply systems for gas, water and electricity, etc., 24-hour continuous operating systems, financial settlement systems and other applications that handle rights and property.

to outdoor equipment, equipment exposed to chemical contamination, equipment exposed (c) Applications under severe condition or in severe environment, including but not limited 4

Page 4