Heat-resistant Environmental Immunity Through-beam Reflective 48 page This page • Wide product variety for temperatures from 100 to 400°C. Select the model according to heat-resistant temperature. Specifications Reflective Fiber Units *1 For continuous operation, use the Fiber Unit between −40 to 90°C. *2 For continuous operation, use the Fiber Unit between −40 to 130°C. *3 The heat-resistant rating is not the same for all parts of the Fiber Unit. Refer to the dimensions diagrams for details. Note 1. The following mode names and response times apply to the modes given in the Sensing distance column. [E3X-ZV] GIGA: Giga-power mode (16 ms), HS: High-speed mode (250 μs), ST:
Standard mode (1 ms), and SHS: Super-high-speed mode (50 μs) [E3NX-FA] GIGA: Giga-power mode (16 ms), HS: High-speed mode (250 μs), ST: Standard mode (1 ms), and SHS: Super-high-speed mode (30 μs) The values for the minimum sensing object are reference values that indicate values obtained in standard mode with the sensing distance and sensitivity set to the optimum values. The first value is for the E3X-ZV and the second value is for the E3NX-FA. The sensing distances for Reflective Fiber Units are for white paper. The sensing distances for the E3NX-FA are values for E3NX-FA @ devices. The distance for E3NX-FAH @ infrared models varies.
The E3X-HD Series offers the same sensing distance as the E3X-ZV. 2. 3. 4. 5.
50 Fiber Sensor Features Selection Guide Fiber Units Standard Installation Threaded Hex-shaped Cylindrical Saving Space Flat Sleeved Beam Improvements Small Spot High Power Narrow view BGS Transparent Objects Retro- reflective Limited- reflective Environmental Immunity Chemical- resistant, Oil-resistant Bending Heat- resistant Applications Area Detection Liquid-level Vacuum FPD, Semi, Solar Installation Information Fiber Amplifiers, Communications Unit, and Accessories Technical Guide and Precautions Model Index 50 Heat- resistant temperature Appearance (mm) Bending radius of cable Sensing distance (mm) Standard sensing object (minimum sensing object) Models 51 Page Dimensions No.
E3X-ZV HS E3NX-FA HS 100°C *1 150°C *2 17.5 M6 IP50 17 M6 IP67 Flexible, R2 R35 GIGA 670 190 1,120 320 Other modes ST : 280 SHS: 80 ST : 450 SHS: 144 GIGA 1,000 280 1,680 Other modes ST : 420 SHS: 80 ST : 670 SHS: 144 (5 μm dia./ 2 μm dia.) E32-D51R 2M E32-D51 2M 480 IP67 200°C *3 25 M6 IP67 R10 420 120 ST : 180 SHS: 54 630 180 ST : 270 SHS: 54 E32-D81R-S 2M IP67 300°C *3 26 5 18 IP30 R25 10 to 20 10 to 20 ST :10 to 20 SHS: − 10 to 20 10 to 20 ST :10 to 20 SHS: − Soda glass with reflection factor of 7% E32-A08H2 2M IP30 25 18 5 IP50 1 to 5 1 to 5 ST : 1 to 5 SHS: − 1 to 5 1 to 5 ST : 1 to 5 SHS: − - E32-L64 2M IP50 200°C *3 33.5 18 5.5 IP60 4 to 10 4 to 10 ST : 4 to 10 SHS:
4 to 10 4 to 10 4 to 10 ST : 4 to 10 SHS: 4 to 10 (5 μm dia./ 2 μm dia.) E32-L86 2M IP60 300°C *3 30 9 24 IP40 20 to 30 20 to 30 ST :20 to 30 SHS: − 20 to 30 20 to 30 ST :20 to 30 SHS: − End surface of soda glass with eflection factor of 7% (t = 0.7 mm, rounded edges) E32-A09H2 2M IP40 350°C *3 28 M4 IP67 420 120 ST : 180 SHS: 54 630 180 ST : 270 SHS: 54 (5 μm dia./ 2 μm dia.) E32-D611-S 2M IP67 25 M6 E32-D61-S 2M 400°C *3 Sleeve bending 30 radius : 10 mm 60 M4 Ф1.65 280 80 ST : 120 SHS: 36 420 120 ST : 180 SHS: 36 E32-D73-S 2M 70°C - Standard Fiber Units can be used.