Special Applications FPD, Semiconductors, and Solar Cells Dimensions Installation Information 62 to 66 Page Limited-reflective Fiber Units E32-L16-N 2M (Free Cutting) E32-A09 2M (Free Cutting) 59-A 59-E Sensing surface Two, 3.2 dia.mounting holes with two, 6 dia. countersinks on both sides Two, 2.2 dia. 9 Sensing surface Lenses 5.8 dia. (Aluminum) 14 10.6 Model display tube 20 8.9 Two, 2.2 dia. 0.95 2.7 6.8 7 (45) 12 7 Two, 3.2 dia. mounting holes with two, 6 dia. countersinks on one side 3.8 20.5 2,000 23 2,000 (PVC) 59-F Two, 3.2 dia. mounting holes with two, 6 dia. countersinks on both sides Sensing surface Lenses 5.8 dia. E32-A09H2 2M (No Cutting) 9 Two, 2.8 dia.
flexible tubes (SUS304) 59-B E32-A08 2M (Free Cutting) (SUS303) 3.8 10.7 6.5 (ABS) Two, 2.2 dia. 24 4 dia. 2.2 dia. 8.9 * Sensing surface Two, 3.2 dia. mounting holes with two, 6 dia. countersinks on both sides 12 14 1.1 7 12 30 A 2,000 5 28 (B) 24.5 2,000 Note: The maximum allowable temperatures for sections A and B are 300°C and 110°C, respectively. The section inserted into the Amplifier Unit (indicated by * ) must be maintained within the Amplifier Unit's operating temperature range. 5 59-G E32-L11FP 2M (Free Cutting) 59-C E32-A08H2 2M (No Cutting) 40 Sensing object (Glass) Two, 3.4 dia. mounting holes with two, 6.3 dia.
countersinks on one side 14 (PFA) 22 (Heat-resistant PVC) 5 1.5 4 dia. 8.6 (5) Sleeve (Aluminum) 4 dia. 2.2 dia. 27 18 12 Sensing surface 4 10.7 6.5 (SUS303) Flexible tube: Two, 2.9 dia. (Stainless steel) (PFA) Two, 4.2 dia. mounting holes 26 A 30 (B) 2,000 Two, 4 dia, (t=0.5) (PTFE) 2 m Note: The maximum allowable temperatures is 300°C for sections A and 110°C for section B (section inserted into Amplifier Unit). 6.5 ±0.1 Two, M3 Mounting holes Two, 2.2 dia. E32-L11FS 2M (Free Cutting) 59-D E32-A12 2M (Free Cutting) 59-H Optical fiber Two, 2.2 dia. Optical axis Two, 3.2 dia. mounting holes with four, 6 dia.
countersinks on both sides 10 17.5 38.5 Sensing object (Glass) Mounting holes 14 12 Model display tube (PFA) 35 1.1 Two, M3 6.5 ±0.2 SUS316L 3.8 10.7 6.5 24.5 2,000 39 5 12 (PFA) Two, 4.2 dia. mounting holes Two, 4 dia, (t=0.5) (PTFE) 2 m Two, 2.2 dia.
59 Fiber Sensor Features Selection Guide iber Units F Threaded Hex-shaped Flat Sleeved Saving Spac Small Spot Beam Improvements High Power Narrow view BGS Retro- reflective Transparent Objects Limited- reflective Chemical- resistant, Oil-resistant nvironmental Immunity Bending Heat- resistant E Area Detection Applications Liquid-level Vacuum FPD, Semi, Solar Liquid-level Vacuum FPD, Semi, Solar Installation Information Fiber Amplifiers, Communications Unit, and Accessories Technical Guide and Precautions Model Index 59