Chapter3 Handling If the Print Position is Shifted Perform the following procedure and see if you can reduce the print position shifting. Executing Media Feed Adjustment Execute media feed adjustment using PrinterSetting (Windows). "Start adjustment" on page 197 This can be selected from the operation panel using the following procedure. [Media Settings] - [Print Position Adjustment] If the problem is not resolved, carry out the following procedure. Checking the Label Position on the Media Used Check if the virtual label position in the compiled data matches the label position on the media actually used and then revise the driver settings.
"Modifying the Media Size Setting" on page 135 If the problem is not resolved, carry out the following procedure. Checking How the Print Start Position Is Shifted Check if there is regularity in the direction to which the print start position shifts. "Checking How the Print Start Position is Shifted" on page 136 If there is no regularity, the label position may be unevenly distributed. In this case, the high speed batch label printing function cannot be used. Investigate improving the accuracy of the media you are using. If there is regularity, carry out the following procedure.
Checking the Gap Between Labels Check the position of the label printed at the end of the compiled data and then revise the driver settings. "Checking the Gap Between Labels" on page 137 Executing Media Feed Adjustment If there is a problem with the media feeding, the print start position may be shifted. Execute media feed adjustment using PrinterSetting (Windows). "Start adjustment" on page 197 This can be selected from the operation panel using the following procedure. [Media Settings] - [Print Position Adjustment] If the shift of the print position does not improve after performing the media feed adjustment, perform the following procedure.
"Modifying the Media Size Setting" on page 135 134