Chapter3 Handling Cleaning the Platen If labels, paper dust, or adhesive has adhered to the platen, paper may get jammed, or printing position may become incorrect. Clean the platen following the procedure below. 1 Turn off the printer, and unplug the power cable. 2 If paper has been loaded, remove it. 6 Lower the paper holder unit. 304 ("How to Remove Pape Peeler Model)" on page 3 Open the front cove 4 Raise the paper hol 5 Use a cloth or cotto r (For the Auto Cutter Model)" on page 66, "How to 68) r. der unit. Remove Pa aten. not clean t n this area n swab to remove adhesive adhered to the pl Do Clea