EPSON — A message is displayed on the operation panel.

Chapter3 Handling Troubleshooting A message is displayed on the operation panel. 316 Message Meaning Solution Information Close the paper cover. The paper cover is open. Close the paper cover. ("Part Names and Functions" on page 20) Information Close the front cover. The front cover is open. Close the front cover. ("Part Names and Functions" on page 20) Information Close the release lever. The release lever is open. Close the release lever. ("Part Names and Functions" on page 20) Information Close the paper guide unit. The paper guide unit is open. Close the paper guide unit. ("Part Names and Functions" on page 20) Information Close the maintenance box cover.

The maintenance box cover is open. Close the maintenance box cover. ("Part Names and Functions" on page 20) Information Close the ink cartridge cover. The ink cartridge cover is open. Close the ink cartridge cover. ("Part Names and Functions" on page 20) Information Paper feed error. Load the paper or change the media source setting. The loaded paper is different from the [Media Source] and [Media Form] settings. Use paper that matches the [Media Source] and [Media Form] settings. Or change the [Media Source] and [Media Form] settings to match them with the loaded paper. ("Media Settings" on page 48) Information Cannot detect the roll paper.

Reload the paper or change the media detection setting. The loaded paper is different from the [Media Detect] settings. Use paper that matches the [Media Detect] settings. Or change the [Media Detect] settings to match them with the loaded paper. ("Media Settings" on page 48) Information Cannot detect the fanfold paper. Reload the paper or change the media detection setting. The loaded paper is different from the [Media Detect] settings. Use paper that matches the [Media Detect] settings. Or change the [Media Detect] settings to match them with the loaded paper. ("Media Settings" on page 48) (On the home screen) Load paper. There is no paper. Load paper.

("Opening the Paper Cover" on page 49) Information The paper size set in the printer may differ from the print setting. The media size differs from the print data size. Load media that matches the print area size. Or change the print area to match it with the media size. ("Media Settings" on page 48) Information The roll paper is not loaded. The roll paper is not loaded. Load roll paper. ("Opening the Paper Cover" on page 49)