EPSON — A message is displayed on the operation panel.

Chapter3 Handling 319 Message Meaning Solution Information Memory Full. Document was not printed. Printing is impossible because the printer has run out of memory. Delete unnecessary files. (On the home screen) Maintenance Request: Replace Parts Soon XXXXXXXX The printer internal parts have almost reached the end of their service life. You will need to replace the parts. Contact qualified service personnel for advice. When contacting, tell the person the “XXXXXXXX” (a 6- or 8- digit alphanumeric code). This message cannot be cleared until the part is replaced. If the part reaches the end of its service life, printing is disabled. Maintenance Request:

End Of Parts Service Life Turn on the printer again. See your documentation for more details. XXXXXXXX The printer internal parts have reached the end of their service life. Printing is disabled until you replace the parts. Contact qualified service personnel for advice. When contacting, tell the person the “XXXXXXXX” (a 6- or 8-digit alphanumeric code). Printer Error Turn on the printer again. See your documentation for more details. XXXXXX A printer error has occurred. 1. Turn off the printer. 2. Check that there is no paper jam or foreign materials near the ejection slot. 3. Turn the printer on. If the printer error still occurs, contact qualified service personnel for advice.

When contacting, tell the person the “XXXXXXXX” (a 6- or 8-digit alphanumeric code). Information Device restarted due to a system error. A system error has occurred. If the printer does not function normally after being restarted, contact qualified service personnel for advice. When contacting, tell the person the “XXXXXXXX” (a 6- or 8-digit alphanumeric code). Information Cannot start cleaning because ink is low. Printer features except cleaning are available. The remaining amount of ink is not sufficient for the print head cleaning. When running the cleaning, install ink cartridges with a sufficient amount of ink remaining.

("Replacing the Ink Cartridges" on page 42) Information Remove the label. The printed label has not been removed. Remove the labels from the peeler. If the error is not cleared, press the Peeler Reset button. Information The print quality may decrease because the nozzles are clogged. The print head nozzles are clogging. The print quality may decrease because the nozzles are clogged. If it is not acceptable, run a print head cleaning. ("Print Head Cleaning" on page 311)