EPSON — CW-C6000 Series (4-inch auto cutter model)

Appendix *1: It is not allowed to have another black mark in the intervening space between the black marks (black mark interval). • Labels and backing paper with holes or cutouts cannot be used. • Set the cut position to a position at least 1.7 mm (0.07 inches) away from the black mark of the next label. • Set the start position of the first label to a position at least 1.5 mm (0.06 inches) away from the leading edge of the backing paper. 365 Black mark position Each black mark should extends at least 18.4 mm (0.72 inches) from side edge baseline.

Black mark width 18.4 mm (0.72 inches) or more Black mark length 4 to 25.4 mm (0.16 to 1 inch), 4 mm (0.16 inches) or more of blank space on label Black mark interval*1 When auto cut is not used: 10 to 615.6 mm (0.39 to 24.24 inches) When auto cut is used: 17.5 to 615.6 mm (0.69 to 24.24 inches)