EPSON — CW-C6000 Series (4-inch auto cutter model)

Appendix Fanfold Die-cut Label (Black Mark) Cut position Waste part Waste part Backing paper Label area 374 Black mark width Backing paper width Paper fe length length mark interval Black Label Perfor mark Black Labels between edge Side e line baseli Gap Center of black Center of black mark detector mark detector Label length Side e baseli Center of black mark detector Form Fanfold Backing paper width 25.4 to 112 mm (1 to 4.41 inches) Label width 21.4 to 108 mm (0.84 to 4.25 inches) Label length When auto cut is not used: 8 to 301.8 mm (0.31 to 11.88 inches) (up to 11.9 inches) When auto cut is used:

15 to 301.8 mm (0.59 to 11.88 inches) (up to 11.9 inches) Gap between Labels When auto cut is not used: 2 to 6 mm (0.08 to 0.24 inches) When auto cut is used: 3 to 6 mm (0.12 to 0.24 inches) Waste part on the left and right 2 ± 0.5 mm (0.08 ± 0.02 inches) Label corner R 1.5 mm (0.06 inches) or less Paper thickness Plain Paper/Matte Paper/Synthetic/Texture Paper/Glossy Paper/Glossy Film/ High Glossy Paper 0.12 to 0.24 mm (0.005 to 0.009 inches) The number of folds 750 or less Perforated line interval 152.4 to 304.8 mm (6 to 12 inches) Black mark position Each black mark should extends at least 18.4 mm (0.72 inches) from side edge baseline. Black mark width 18.4 mm (0.72 inches) or more