Appendix *1: It is not allowed to have another black mark in the intervening space between the black marks (black mark interval). • Labels and backing paper with holes or cutouts cannot be used. • Auto cutting on the perforated lines will generate scraps of paper that may cause problems. Also, auto cutting ahead of the perforated line may cause problems when feeding paper. Therefore, perform auto cutting when paper is fed at least 0.8 mm (0.03 inches) away from the perforated line. • Set the black mark position to a position at least 2.5 mm (0.1 inches) away from the perforated line.
• Set the cut position to a position at least 1.7 mm (0.07 inches) away from the black mark of the next label. • Set the start position of the first label to a position at least 1.5 mm (0.06 inches) away from the leading edge of the backing paper. 375 Black mark length 4 to 25.4 mm (0.16 to 1 inch), 4 mm (0.16 inches) or more of blank space on label Black mark interval*1 When auto cut is not used: 10 to 307.8 mm (0.39 to 12.12 inches) When auto cut is used: 18 to 307.8 mm (0.71 to 12.12 inches) Perforation interval Three (hole portion) to one (no hole portion) Perforation form Usable if a hole is located at side edges