Appendix • Labels and backing paper with holes or cutouts cannot be used. • Auto cutting on the perforated lines will generate scraps of paper that may cause problems. Also, auto cutting ahead of the perforated line may cause problems when feeding paper. Therefore, perform auto cutting when paper is fed at least 0.8 mm (0.03 inches) away from the perforated line. • Set the leading edge of the next label to a position at least 1.5 mm (0.06 inches) away from the perforated line. • Set the cut position to a position at least 0.7 mm (0.03 inches) away from the leading edge of the next label. 385