EPSON — Acquisition of mode setting value for ink low signal (input)

Chapter 3 Commands Acquisition commands for mode setting values for error & pause signal (output) [Format] ~H(CNA,E [Parameter] None [Function] Acquire the mode setting values for the error & pause signal. 3 44 Return value after executing this command Description D/0 Error & pause signal (pin 17) OFF (not output) 1 Error & pause signal (pin 17) set to Normal: High, When an error occurs: Low E/2 Error & pause signal (pin 17) set to Normal: Low, When an error occurs: High 3 Set the error & pause signal (pin 17) as follows: Normal: High, When an error occurs or the printer is paused: Low. N/4 Set the error & pause signal (pin 17) as follows: Normal:

Low, When an error occurs or the printer is paused: High. 3 Set the error & pause signal (pin 17) as follows: Normal: High, When an error occurs or the printer is paused: Low. N/4 Set the error & pause signal (pin 17) as follows: Normal: Low, When an error occurs or the printer is paused: High. Acquisition of mode setting value for ink low signal (input) [Format] ~H(CNA,J [Parameter] None [Function] This acquires the mode setting value for the ink low signal. Return value after Description executing this command 0 Mode in which the ink low signal (pin 8) is OFF (not output) 1 Mode in which the ink low signal (pin 8) is as follows: Normal: High, When there is little ink remaining:

Low 2 Mode in which the ink low signal (pin 8) is as follows: Normal: Low, When there is little ink remaining: High Return value after executing this command Description 0 Mode in which the ink low signal (pin 8) is OFF (not output) 1 Mode in which the ink low signal (pin 8) is as follows: Normal: High, When there is little ink remaining: Low 2 Mode in which the ink low signal (pin 8) is as follows: Normal: Low, When there is little ink remaining: High