Chapter 3 Commands Acquisition of mode setting value for ink cartridge exchange signal (input) [Format] ~H(CNA,I [Parameter] None [Function] This acquires the mode setting value for the ink cartridge exchange signal. 3 45 Return value after executing this command Description 0 Mode in which the ink cartridge exchange signal (pin 22) is OFF (not output) 1 Mode in which the ink cartridge exchange signal (pin 22) is as follows: Normal: High, When ink must be replaced: Low 2 Mode in which the ink cartridge exchange signal (pin 22) is as follows: Normal: Low, When ink must be replaced: High 2 Mode in which the ink cartridge exchange signal (pin 22) is as follows: Normal:
Low, When ink must be replaced: High Acquisition command of mode setting value for paper out signal (input) [Format] ~H(CNA,P [Parameter] None [Function] This acquires the mode setting value for the paper out signal. Return value after Description executing this command 0 Mode in which the paper out signal (pin 25) is OFF (not output) 1 Mode in which the paper out signal (pin 25) is as follows: Normal: High, When there is no paper: Low 2 Mode in which the paper out signal (pin 25) is as follows: Normal: Low, When there is no paper:
High Return value after executing this command Description 0 Mode in which the paper out signal (pin 25) is OFF (not output) 1 Mode in which the paper out signal (pin 25) is as follows: Normal: High, When there is no paper: Low 2 Mode in which the paper out signal (pin 25) is as follows: Normal: Low, When there is no paper: High