Chapter 3 Commands Acquisition commands for mode setting values for feed signal (input) [Format] ~H(CNI,F [Parameter] None [Function] Acquire the mode setting values for the feed signal. 3 [Format] ~H(CNI,R [Parameter] None [Function] Acquire the mode setting values for the re-print signal. 47 Return value after executing this command Description 0 Feed signal (pin 11) ignored 3 Feed signal (pin 11) set to feed the label when a Low signal is input for 30 msec or longer Acquisition commands for mode setting values for start print signal (input) [Format] ~H(CNI,S [Parameter] None [Function] Acquire the mode setting values for the start print signal.
Return value after Description executing this command 0 Start print signal (pin 10) ignored 1 Start print signal (pin 10) set to print labels when a Low signal is input for 30 msec or lon- ger 3 Start print signal (pin 10) set to print labels as long as a Low signal is input Acquisition commands for mode setting values for re-print signal (input) Return value after executing this command Description 0 Start print signal (pin 10) ignored 1 Start print signal (pin 10) set to print labels when a Low signal is input for 30 msec or lon- ger 3 Start print signal (pin 10) set to print labels as long as a Low signal is input Return value after executing this command Description 0 Re-print signal (pin 13) ignored 1 Re-print signal (pin 13) set to reprint the previously printed label when a Low signal is input for 30 msec or longer