Chapter 5 Timing Basic Timing for Pausing The basic timing for pausing is as follows. Once 1 second has elapsed to wait for data, the head is capped. When the head is capped, it takes about 2 seconds to start printing after the start print signal is given for the next print job. The pin 10 start print signal is indicated when level mode is set, and the pin 18 end print signal is indicated when Mode 1 (= the printer feeds paper during Low) is set. When transitioning from the Print state to the Pause state, or from the Pause state to the Print state, the pause signal must have an interval of 1 second or more.
5 50 Signal Printer status Signal status Idling/ waiting for data Receiving and deploy- ing data Printing Paused Printing Idling/ waiting for data* Receiving and deploy- ing data Printing Printer ready Printer not ready PRINTER READY DATA READY Data ready Not ready START PRINT Pause Min. 1 sec END PRINT Paper feeding Otherwise