Chapter 6 External I/F Signal Operation Mode Settings External I/F Signal Operation Mode Settings This section describes the items that can be set on the printer’s operation panel or in the PC utility (Printer Set- ting). The items that can be set from the printer’s operation panel differ depending on the firmware version of the printer. End Print Signal Mode Settings The settings are as follows. Data Ready Signal Mode Settings The settings are as follows. 6 54 Setting value (mode) Description Disable Turn the end print signal OFF. (End print signal not output) Mode 1 Set the end print signal as follows: Normal: High, When feeding paper: Low. Mode 2 Set the end print signal as follows:
Normal: Low, When feeding paper: High. Mode 3 Set the end print signal as follows: Normal: High, When continuous printing ends and the printer stops at the predetermined position: Low for 20 msec. Mode 4 Set the end print signal as follows: Normal: Low, When continuous printing ends and the printer stops at the predetermined position: High for 20 msec. Setting value (mode) Description Disable Turn the data ready signal OFF. (Data ready signal not output) Mode 1 Set the data ready signal as follows: Normal: High, When data is ready: Low. Mode 2 Set the data ready signal as follows: Normal: Low, When data is ready: High.