EPSON — Printer Ready Signal Mode Settings

Chapter 6 External I/F Signal Operation Mode Settings Clogged Nozzle detected Signal Mode Settings The settings are as follows. Head Maintenance Signal Mode Settings The settings are as follows. Printer Ready Signal Mode Settings The settings are as follows. 6 55 Setting value (mode) Description Disable Turn the clogged nozzle detected signal OFF. (Clogged nozzle detected signal not out- put) Mode 1 Set the clogged nozzle detected signal as follows: Normal: High, When a clogged nozzle is detected: Low. Mode 2 Set the clogged nozzle detected signal as follows: Normal: Low, When a clogged nozzle is detected: High. Setting value (mode) Description Disable Turn the head maintenance signal OFF.

(Head maintenance signal not output) Mode 1 Set the head maintenance signal as follows: Normal: High, During head maintenance: Low. Mode 2 Set the head maintenance signal as follows: Normal: Low, During head maintenance: High. Setting value (mode) Description Disable Turn the printer ready signal OFF. (Printer ready signal not output) Mode 1 Set the printer ready signal as follows: Normal: High, When the printer is ready: Low. Mode 2 Set the printer ready signal as follows: Normal: Low, When the printer is ready: High.