Chapter3 Handling Setting Label Size and Paper Layout for Borderless Printing This section describes the concepts and settings methods for borderless printing using the Epson printer driver. • Setting the left and right gaps to less than 2 mm {0.08 in.} may cause ink stains on labels or hands. • Adding a margin of 1.5 mm {0.06 in.} or more at the top edge of the print area may reduce the ink stains. Borderless Printing Concepts Borderless printing can be achieved by adjusting the left and right gap settings of the printer driver to align the print start position with the left edge of the label.
Use label paper that has waste parts (the adhesive paper around each label that is discarded) to prevent the release liner (backing paper) from being smudged with ink. Label Waste part Release liner Using die-cut label paper that do not have waste parts around each label may cause ink to adhere to the label, your hands, or the inside of the printer, resulting in stains. 290 Adjust Left and Right Adjust Left and Right