Daikin 3P607381-6C/BRC1H63W/BRC1H63K Remote Control Manual PDF (EN)

3P607381-6C EM22A036 Information Screen Wired remote controller English The current status is displayed with icons. Operation Handbook About Icons on the Information Screen The items displayed vary depending on the indoor unit you are using. Button Locations and Descriptions MODEL: BRC1H63W/BRC1H63K ON/OFF button Press this button to turn on the system. Press this button again to turn off the system. LCD Status indicator (LED) During operation, the light ring around the display lights up blue/red/green. Lights up blue: Operating, Blinks red: Error is occurring, Lights up/blinks green: Bluetooth connecting + - NAVIGATE/ADJUST button Navigate right. Adjust a setting.

NAVIGATE/ADJUST button Navigate left. Adjust a setting. SELECT/ACTIVATE/SET button From the home screen, enter the main menu. From the main menu, enter one of the submenus. From their respective submenu, activate an operation/ventilation mode. Read this Manual Before Using the Product • This manual describes the basic operation of the indoor unit which uses the BRC1H63W/BRC1H63K remote controller. Keep this manual where it is readily accessible, and refer to it when necessary. • For detailed contents, refer to the BRC1H63W/BRC1H63K operation manual on our website.

Also, for explanation about things other than remote controller operation, refer to the operation manual attached to the indoor unit. (A) For manuals in other languages, please read this Two-dimensional code to access the manuals. (B) Timer setting (A): Displays that Off timer or Schedule is available. (B): If clock setting becomes unset, this mark is displayed. Web Manual * The Bluetooth® and Zigbee™ word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc and Zigbee Alliance, respectively, and the use of such marks by Daikin Industries LTD. is under license. Other trademarks and trade names are those of their respective owners.

Safety Precautions „ Also refer to installation manual attached to the indoor unit. CAUTION Please read these “Safety Precautions” carefully before installing the remote controller. • This manual classifies the precautions into WARNINGS and CAUTIONS. Be sure to follow all the precautions below: They are all important for ensuring safety. To avoid electric shocks due to entry of water or insects, fill the wiring through hole with putty. Do not operate with wet hands to avoid electric shocks. Do not wash the remote controller with water. Failure to do so many cause electric shock or a fire.

Install the air conditioner, power supply wiring, remote controller wiring and transmission wiring at least 1 meter away from televisions or radios to prevent image interference or noise. (Depending on the radio waves, a distance of 1 meter may not be sufficient to eliminate the noise.) Do not install the remote controller in the following locations: 1. Where there is oil mist, oil spray or vapour for example a kitchen. Resin parts may deteriorate and fall off. 2. Where corrosive gas, such as sulphurous acid gas, is produced. 3. Where there is machinery which emits electromagnetic waves. Electromagnetic waves may disturb the control system, and cause a malfunction of the equipment. 4.

Where flammable gas may leak, where there is carbon fibre or ignitable dust suspensions in the air, or where volatile flammables such as thinner or gasoline are handled. Operating the unit in such conditions may result in a fire. 5. High temperature area or near a heat source. It may cause an overheat or a fire. 6. Moist area, or place where may be exposed to water. If water enters inside of the remote controller, electrical components may fail. It may result in electric shocks or a fire. • After completing installation, conduct a test operation to check for faults and explain to the customer how to operate the remote controller and cleaning of it with the aid of the operation manual.

Ask the customer to store the installation manual along with the operation manual for future reference. WARNING Ask your dealer or qualified personnel to carry out installation work. Do not attempt to install the remote controller yourself. Improper installation may result in electric shocks or a fire. Consult your local dealer regarding relocation and reinstallation of the remote controller. Improper installation may result in electric shocks or a fire. Install the remote controller in accordance with the instructions in this installation manual. Improper installation may result in electric shocks or a fire. Be sure to use only the specified accessories and parts for installation work.

Failure to use the specified parts may result in the remote controller falling down, electric shocks or a fire. When remote controller’s thermostat sensor is used, select the installation location by considering the followings. • A place where average temperature in the room can be detected. • A place where is not exposed to direct sunlight. • A place where is far apart from heat source. • A place where is not affected by outdoor air due to door opening/closing or the like. Install the remote controller on a foundation that can withstand its mass. Insufficient strength may result in the remote controller falling down and causing injury.

Make certain that all electrical work is carried out by qualified personnel according to the applicable legislation (note 1) and this installation manual, using a separate circuit. In addition, even if the wiring is short, make sure to use a wiring that has sufficient length and never connect additional wiring to make the length sufficient. Insufficient capacity of the power supply circuit or improper electrical construction may lead to electric shocks or a fire. (note 1) applicable legislation means “All international, national and local directives, laws, regulations and/or codes which are relevant and applicable for a certain product or domain”.

Maintenance Maintaining the Unit and LCD Display Turn off the power before performing installation work. Touching live parts may cause electric shocks. Wipe the LCD and surface of the remote controller with a dry cloth when they become dirty. If the dirt on the surface cannot be removed, soak the cloth in neutral detergent diluted with water, squeeze the cloth tightly, and clean the surface. Wipe the surface with a dry cloth. • Do not use non-neutral detergents or organic solvents (alcohol disinfectant, benzene, paint thinner, etc.). May cause cracking, electric shocks or fire. Do not disassembly, reconstruct or repair. Failure to do so many cause electric shock or a fire.

Make sure that all wiring is secured, using the specified wirings and ensuring that external forces do not act on the terminal connections or wirings. Improper connections or fixing may cause an overheat or a fire. The choice of materials and installations must comply with the applicable national and international standards. NOTICE Do not use any paint thinner, organic solvent, or strong acid. Icon Name Description Information MAIN/SUB remote controller Bluetooth* Setback Centralized Control Changeover Under Control (VRV only) Backup Energy savings Test operation Defrost/Hot start Self-cleaning filter operation 24-hour ventilation Indicates that 24-hour ventilation is set.

* May not be displayed even if connected to a unit with this function. Night purge Ventilating standby Ventilating operation Pre Vent (Fresh-up) Warning Zigbee* Displayed: Zigbee sensor linked control is available. Blinking: Displays there is error with Zigbee sensor connection. W Indicat ARNING result i es a potentially hazardous situation which, if not avoided, could n death or serious injury. C Indicat AUTION result i It may es a potentially hazardous situation which, if not avoided, may n minor or moderate injury. also be used to alert against unsafe practices.

Стр. 1

Overview of Screens The descriptions in this section are just examples. The items available for setting vary depending on the indoor unit you are using. If there is no button operation for about 10 seconds, the screen returns to the home screen. Home screen Information screen 12:34 30 28 Press . Press and hold for 5 seconds. The list of indoor unit functions, current time, and error codes, etc. are displayed as icons. For the meaning of each icon, refer to the front side of this sheet. Use or to select , then press . Press . User menu Use or to select the icon you want to change to, then press .

You can change fundamental functions such as the operation mode, fan speed, airflow, brightness of Status indicator (LED), and Fahrenheit/Celsius display. Changing the operation mode Changing the fan speed Changing the airflow direction Use or to select the operation mode you want to change to, then press . Use or to select the fan level you want to change to, then press . Use or to select the airflow direction you want to change to, then press . Auto Heat Cool Fan Dry Auto Lv1. (L) Lv.2 Position 0 Position 1 Position 2 Position 3 Lv5. (H) Lv.4 Lv3. (M) Auto Swing Position 4 Names and Functions Depending on the connected model, some items may not be displayed.

Home screen Information screen Screen display explanation g f m a OFF • Displayed when operation is stopped. j Fahrenheit/Celsius • Depending on the setting, Fahrenheit/ Celsius display can be selected. b a 30 h q 12:34 n b Error/Filter/Test/Streamer/Zigbee icon • Error, filter, test, streamer and Zigbee icons are displayed. k Air Purifying i c OFF 28 r o : Error : Filter : Test l Set temperature • Displays setpoint temperature. d e j k p : Streamer : Zigbee m Clock (24 hours time display) l A3-01 (Unit 00) • The streamer icon is displayed when Mold Proof operation is active. n MAIN/SUB remote controller sign Icon view • The Zigbee icon will flash when sensor connection is lost.

o Status • Notifies the status. User menu c Centralized Control • Displayed when under centralized management. p Error display • If an error occurs, the icon, an error code and unit number are displayed. m q n 12:34 30 32 1050 PPM A3-01 (Unit 00) d Operation mode • Displays the current operation mode. q Information icon r Bluetooth/Zigbee icon • Bluetooth and Zigbee icons are displayed. : Bluetooth t s e Ventilation mode : Zigbee p f Room temperature • Displays the current room temperature. s Sensor values • Zigbee sensor values are displayed when normal values are received and Zigbee sensor settings have been configured.

• If Zigbee sensor values cannot be received, sensor values will be displayed as per original settings. • If there are no sensors, a horizontal bar (“–”) is displayed. Sensor view g Setback • Blinks during setback operation. • Displayed during setback setting. h Bluetooth • Indicates that the controller is communicating with a mobile device, for use with the app. i Changeover Under Control • Displayed when controller is unauthorized to select heating/cooling operation. t Settings menu icon 3P607381-6C EM22A036 [2210] HT

Стр. 2