CABINET SIDES AND FRONT: Many techniques are available to prepare the cabinet for conversion. A few are listed below: or SIDE DECALS- Remove cover with paint. REPAINT-— Paint conventional roller sufficient previous APPLY amount of carefully using heat gun over all graphics using and latex based paint. a Use paint all to totally cover a graphics. NEW GRAPHICS- been included color and may graphics. in the kit also cover New side graphics have which will provide new up some types of old HEADER PLEX (TOP FLASHING): A new marquee with game graphics is supplied with each of DATA EAST'S game kits.
Due to the large variety of sizes of header plex's used by the various game manufacturers, you may have to cut the marquee to size using an appropriate saw. In some cases the marquee will be too small to completely fill the opening left after the removal of the original plex. This may be solved by removing the screen printed graphics from the original plex (see monitor plex) and mounting the DATA EAST marquee be~ hind it. If the original plex is longer, you may wish to saw spacers from the original plex. Paint them black and put them on one or both sides of the new marquee.