Руководство по эксплуатации Epson DM-D310F — принтеры и сканеры (EN)

User’s Manual / Manuale dell’utente

Стр. 1

Standards and Approvals

Standards and Approvals The following standards are applied only to the liquid crystal displays that are so labeled. (EMC is tested using the Epson power supplies.) Europe: CE marking CE Marking ☞ http://www.epson.eu/conformity WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. AVVERTENZA Questo и un prodotto di Classe A. In ambiente domestico, questo prodotto puт causare interferenze radio. In tal caso, l’utente deve adottare le misure necessarie per eliminare l’interferenza.

Indication of the manufacturer and the importer in accordance with requirements of directive 2011/65/EU (RoHS) Manufacturer: SEIKO EPSON CORPORATION Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502, Japan Web site: http://www.epson.com/ Importer: EPSON EUROPE B.V. Address: Atlas Arena, Asia Building, Hoogoorddreef 5,1101 BA Amsterdam Zuidoost The Netherlands Web site: http://www.epson.com/europe.html Tьrkiye'deki kullanıcılar iзin AEEE Yцnetmeliğine Uygundur. Ьrьnьn Sanayi ve Ticaret Bakanlığınca tespit ve ilan edilen kullanma цmrь 5 yıldır. Tьketicilerin şikayet ve itirazları konusundaki başvuruları tьketici mahkemelerine ve tьketici hakem heyetlerine yapılabilir. Ьretici:

SEIKO EPSON CORPORATION Adres: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan Tel: 81-263-86-5353 Web: http://www.epson.com/ Для українських користувачів Обладнання відповідає вимогам Технічного регламенту обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні. 2 Standards and Approvals

Стр. 2

English

English Introduction This manual presents important information intended to ensure safe and effective use of this product. Read this section carefully and store it in an accessible location. Key to Symbols The symbols in this manual are identified by their level of importance, as defined below. Read the following carefully before handling the product. WARNING Warnings must be followed carefully to avoid serious bodily injury. CAUTION Cautions must be observed to avoid minor injury to yourself, damage to your equipment, or loss of data. Safety Precautions WARNING: Never attempt to repair this product yourself. Improper repair work can be dangerous. Never disassemble or modify this product.

Tampering with this product may result in injury, fire, or shock. Do not allow foreign matter to fall into the equipment. Penetration by foreign objects may lead to fire. Do not use aerosol sprayers containing flammable gas inside or around this product. Doing so may cause fire. DM-D310F User’s Manual 3

Стр. 3

English

CAUTION: Do not place heavy objects on this product. Never stand or lean on this product. It may cause breakage and possible injury. Do not inflict a strong impact by dropping the unit or treating it roughly. A glass panel may break, and it may cause injury. Do not place this product in high temperature or high humidity, and never allow condensation on this product. Problems could occur such as malfunction or poor display quality. The rotating angle of the display is limited by a stopper. Do not apply excess force to rotate it past the limit set by the stopper. Doing so may cause damage. Take care when handling the display not to knock it because it has a built-in liquid crystal display.

Unpacking The following items are included with the standard specification display. If any item is damaged, contact your dealer. ❏ DM-D310F ❑ DM-D stand ❏ Ferrite core (large) ❑ Ferrite core (small) ❏ Base plate 4 DM-D310F User’s Manual

Стр. 4