Troubleshooting Your Computer Troubleshooting Techniques Serial, Parallel, and USB Problems If a serial mouse doesn’t work • Make sure you followed the manufacturer’s installation instructions completely and have installed the mouse properly. If not, repeat the procedure. • Make sure the port connection is secure. • Press the blue sleep button to suspend and resume. • Restart the computer: click Start, Shut Down, Restart. • Check mouse settings in Control Panel: click Start, Settings, Control Panel, then double-click Mouse. • Make sure the serial port is enabled in BIOS Setup—see “To run the BIOS Setup utility” on page 80. • Use a mouse that connects to the PS/2 port.
If you have a PS/2 keyboard connected, use a PS/2 Y adapter (HP accessory F1469A). • Check the port settings in Control Panel: 1. Click Start, Settings, Control Panel, then double-click System. 2. Open the hardware Device Manager, then double-click Ports (COM & LPT). If a serial modem doesn’t work properly • See “Modem Problems” on page 156. • Use the Modem Troubleshooter in Windows Help: click Start, Help, Contents, Troubleshooting. • Make sure the port connection is secure. • Check the modem settings in Control Panel: click Start, Settings, Control Panel, then double-click Modems (Windows 95 or 98) or Phone and Modem Options (Windows 2000).
• Make sure the serial port is enabled in BIOS Setup—see “To run the BIOS Setup utility” on page 80. • Disable the internal modem: 1. Click Start, Settings, Control Panel, then double-click System. Corporate Evaluator’s Guide 165