HP — If the USB port is not working

Troubleshooting Your Computer Troubleshooting Techniques 2. Open the hardware Device Manager. 3. Double-click Modem to list the current modem devices. 4. Double-click the internal modem, then select the option to disable the modem. • Check the port settings in Control Panel: 1. Click Start, Settings, Control Panel, then double-click System. 2. Open the hardware Device Manager, then double-click Ports (COM & LPT). If the serial or parallel port is not working • Make sure the port connection is secure. • Check the port settings in Control Panel: 1. Click Start, Settings, Control Panel, then double-click System. 2. Open the hardware Device Manager, then double-click Ports (COM & LPT).

• Use the BIOS Setup utility to make sure the serial and parallel ports are enabled—see “To run the BIOS Setup utility” on page 80. • Test the ports with the DiagTools diagnostics. See “Testing the Hardware” on page 169. If the USB port is not working • Contact the vendor of the peripheral device—as well as HP—for the latest versions of the USB drivers. • Check the port settings in Control Panel: 1. Click Start, Settings, Control Panel, then double-click System. 2. Open the hardware Device Manager, then double-click Universal Serial Bus Controller.

• Contact the vendor of the peripheral device—and the HP Notebook Web site (www.hp.com/notebooks)—for the latest version of the driver for the device. • Test the USB port with the DiagTools diagnostics. See “Testing the Hardware” on page 169. 166 Corporate Evaluator’s Guide