Tire pressure monitoring system 4.3-12 • Balance tire pressure sensor (1) and tighten the fixing nuts (2) of it to the valve stem. • Tighten the fixing nuts of the tire pressure sensor 5 ±0.5N·m with 11mm socket wrench. • Refit the tires with a tire changer (1). (Refer to "Removal and Refitting of Battery"). • After the tire is refitted, inflate the tire and spray soapy liquid to check if the tire is leaking. If there is no air leakage, screw on the dust cap. If the air leaks, find out the cause and re-assemble it. • After the assembly is completes, inflate the tire to the standard pressure (inspect using the tire pressure gauge). • Refit the tires to the wheels.
(See "Removal and Refitting of Wheel" in Wheel section.) • Match the tire pressure monitoring system after the wheel is installed. (Refer to the "Tire Pressure Learning" in this section.) CAUTION • When refitting the tire with the tire changer, always keep the tire changer mounting head (1) 90° above the valve, otherwise the tire pressure sensor may be damaged.