Tire pressure monitoring system 4.3-13 Removal and refitting of tire pressure monitoring control unit 1 - Protection Place protective pads at following locations: • Front fender; • Front bumper; • Driver’s seat; • Carpet (on driver's side); • Steering wheel; • Parking brake lever; Shift lever • Shift lever. 2- Recommended tools • Interior trim removal tool (BF1102) [1]. 3 - Removal • Turn off the ignition switch, and disconnect the battery negative cable. • Remove the trunk lid left protective plate.
(Refer to the section "Removal and Refitting of Trunk Interior Trims" in "Interiors and Exteriors"section.) • Remove the fixing bolts (1) of the tire pressure monitoring control unit with an 8mm socket wrench. • Remove the tire pressure monitoring control unit from the vehicle body.