Mitsubishi — 3.8.2 Button Elements

Chapter 3 Creating and Editing Screens Revision May, 2010 3-93 Button Type Macro Read Write Function Momentary ON OFF V V After pressing this button, the state of the setting address (Bit) will be set to ON and execute ON Macro at the same time. When pressing the button again, the state of the setting address will be OFF and execute OFF Macro simultaneously. Multistate X V V There are 1~256 user-defined multi-states for setting. The user can set the execution sequence to the next state or the previous state. Set Value X X V After pressing this button, the “Numeric keypad” dialog box will pop up on HMI screen for the user to input the setting value directly.

After inputting the setting value and pressing ENTER key, HMI will transmit the input value to the setting address. Set Constant X X V After pressing this button, HMI will write the specific value into the setting address. Increment X V V After pressing this button, HMI will add up the value contained within the setting address and the setting constant value, and store the addition result back into the setting address. Decrement X V V After pressing this button, HMI will subtract the setting constant value from the value contained within the setting address, and store the subtraction result back to the setting address.

Goto Screen X X X After pressing this button, it will switch to the screen that the user designated. Previous Page X X X After pressing this button, it will go back to the previous screen. For example, suppose that there are three screens, screen 1, screen 2 and screen 3. If the user has switched the screen from screen 1, screen 2 to screen 3 in order, when pressing “previous page” button on screen 3, HMI will switch to screen 2. When pressing “previous page” on screen 2 again, HMI will switch to screen 3. System DateTime O X X After pressing this button, it will set the system date and time of HMI (year-month-day, hours:minutes:seconds).

Password Table Setup O X X After pressing this button, the user can set all the passwords of user security level.