Mitsubishi — 3.8.2.1 Set / Reset / Maintained / Momentary Buttons

Chapter 3 Creating and Editing Screens Revision May, 2010 3-95 Property Description of General Buttons Write Address Read Address The link type can be Base Port (Controller) or Internal Memory or Internal Parameter. If the user is connecting to multi connections, the new connections will be added into the “Link” drop-down list. After selecting the Link option and Device Type, and correct address, press the Enter key, the corresponding numeric value will be recorded on the element that the user selected. Device types are described as follows:

$ Internal Memory RCP Recipe Register $M Non-volatile Internal Memory RCPNO Recipe Number Register *$ Indirect Address Memory RCPG Recipe Group Number Register Other Other device name supported by other brands of controller. Please refer to DOP Series HMI Connection Manual.