Chapter 3 Creating and Editing Screens Revision May, 2010 3-109 Property Description of Goto Screen / Previous Page Buttons Trigger Trigger Type The user can use this setting to trigger the designated controller address to be ON before or after writing the setting value. Please note that this function can only trigger the controller address to be ON. If the controller address needs to be triggered again, the user should set the address to be OFF manually. Setting This dialog box will pop up only when the button function is “Goto screen”. Close Sub-Screen When this option is selected, it indicates that this Goto screen button is only valid in Sub-Screen.
When pressing this button, the current (active) sub screen will be closed. User’s security level will be set to Low Security after changing screen. When this option is selected, it will force the current user’s priority to be the lowest after the button is pressed. This can prevent the misoperation made by the user (operator). User Security Level Use this option to set the user priority for pressing this element. Only the priority that is equal to or higher than the current setting can use this element.