Mitsubishi — 3.8.2.6 Goto Screen / Previous Page

Chapter 3 Creating and Editing Screens 3-110 Revision May, 2010 Property Description of Goto Screen / Previous Page Buttons Goto Screen When clicking this option, the following dialog box will pop up: In this “Open Screen” dialog box, the user can select the desired screen from left side and the preview screen will display on the right side. After selecting the screen and pressing OK button, HMI will record the designated screen to this Goto button element. InterLock Address InterLock Level When InterLock Address is set to be ON or OFF (this is determined by the property of “InterLock Level”), this button can be enabled.

Before Execute Macro If this option is set, when the user presses the button, the system will execute the command of this macro first and then perform the operation of this button. But, if the state of the button is not triggered by pressing the button (via macro or external signal), the command of this macro will not be executed. After Execute Macro If this option is set, when the user presses the button, the system will perform the operation of this button first and then execute the command of this macro. But, if the state of the button is not triggered by pressing the button (via macro or external signal), the command of this macro will not be executed.

Enable the confirm window When this option is set, an Action Confirm dialog box will appear to prompt the user everytime when the button is pressed. Invisible Address When this option is set to On, this button element will be invisible. X Used to set X coordinate Y Used to set Y coordinate Width Used to set the element width Height Used to set the element height