Chapter 3 Creating and Editing Screens Revision May, 2010 3-113 Property Description of System Function Buttons Function Enter Password This button provides HMI a password input interface. It will open the corresponding priority by the input password. The higher level the user inputs, the higher priority the user has. Please refer to the figure at right. Contrast Brightness This button allows the user to adjust HMI LCD contrast and brightness settings. After pressing this button, the user will get the following pop-up window to adjust HMI LCD contrast and brightness settings. If the user presses “Set for default Contrast” button, it will set HMI LCD to the default settings.
Low Security Using this button can set the user priority to the lowest (Level 0). This option makes the user priority level become the lowest to protect control system parameter not to be modified when the user exits the different screens. It can also avoid the misoperation that may cause system error. (This function is also provided for Goto screen button.) System Menu After pressing this button, HMI will be back to system menu screen. The user can return to operation screen just by activating “Run” function or startup HMI again. Report List This button has many functions.
It can be used flexibly depending on the properties of the “Report List” option (Please refer to page 2-124 in Chapter 2 and the following description of Report Device).