Chapter 3 Creating and Editing Screens 3-114 Revision May, 2010 Property Description of System Function Buttons Function Screen Capture After pressing this button, the screen data can be captured and output to USB disk (BMP files). The file output designation is located on USB disk. If a USB disk is not connected, the captured data cannot be output by HMI successfully. The output BMP files will be stored in a folder named with the current date, e.g. 20090101 (it indicates the download date of that file is year 2009 January 1th). In the while, the following window will display on HMI screen.
When this window shows up, it indicates that the downloading operation is processing and the screen data is written into USB disk. The BMP files will be saved in the folder in order. The first file will be named as 00001, the second file will be named as 00002 and so on. ※ Please note that only FAT32 formatted USB disk can be connected. Please refer to the description of section 2.1. Remove Storage The user can press this button to remove the USB disk to ensure that the data is saved completely in USB disk. ※ Please note that only FAT32 formatted USB disk can be connected. Please refer to the description of section 2.1.
Import/Export Recipe The system is able to import and export 16bits Word and 32bits Double Word two kinds of data. Press this button is to import the recipe from external memory (USB disk) or export the data saved in HMI. ※ Please note that only FAT32 formatted USB disk can be connected. Please refer to the description of section 2.1. Calibration Press this button to perform calibration function. Language Changer Press this button to change the display language.