Chapter 3 Creating and Editing Screens 3-126 Revision May, 2010 Property Description of Pipe (1) / Pipe (2) Elements Setting Data Length: There are 16bits Word and 32bits Double Word two options. Memory Format: here are following data format provided: Word/Double Word 1. BCD 2. Signed BCD 3. Signed Decimal 4. Unsigned Decimal 5. Hex Minimum Value Maximum Value Used to set the minimum and maximum capacity of the pipe element. Target Value Color The user can decide if the target value displays or not by using this option. Ranges (Enable range setting) Please refer to the description of Low & High Region Color.
Variable target/range limits When the target value and low & high limit is a variable value, the low limit address is Read Address+1, the high limit address is Read Address+2 and the address of target value is Read Address+3. When the user has input the target value, low & high limit, and minimum & maximum value, after pressing OK button, HMI will examine the value by referring to the selected data length and data format.