Mitsubishi — 3.8.7.2 Range Indicator

Chapter 3 Creating and Editing Screens 3.8.7.2 Range Indicator 3-134 Revision May, 2010 Property Description of Multistate Indicator Element Data Length Bit Indicator element can have two states. Word Indicator element can have 256 states. LSB Indicator element can have 16 states. Data Format It provides BCD, Signed Decimal, Unsigned Decimal and Hex four kinds of data format to display the read memory content. Add/Remove State It is used to set the state numbers of multistate indicator. If the data length of the value is in Word, 1~256 states can be set. If the data length of the value is in LSB, 16 states can be set. If the data length of the value is in Bit, only 2 states can be set.

Invisible Address When this option is set to On, this button element will be invisible. X Used to set X coordinate Y Used to set Y coordinate Width Used to set the element width Height Used to set the element height Property Description of Range Indicator Element Range indicator provides a method to indicate the state of some specific address. HMI reads the value of the corresponding address (register) and uses this read value to correspond with the corresponding range indicator element and its setting value, and then display the corresponding state on HMI screen. Read Address The address can be internal memory or the controller address.

(Please refer to Table 3-8-2 Property Description of General Buttons.) The user also can add a picture into each state of the range indicator and then the corresponding picture will show when each state is activated. Text Text Size Font Text Color The user can set the text, text size, font and text color provided by Windows® to determine the text display on the element (Please refer to Table 3-8-2 Property Description of General Buttons.) Blink The element can blink to remind the user.

(Please refer to Table 3-8-2 Property Description of General Buttons.) Bank (Picture Bank) Picture Name (Please refer to Table 3-8-2 Property Description of General Buttons.) Transparent Effect Transparent Color (Please refer to Table 3-8-2 Property Description of General Buttons.)