Chapter 3 Creating and Editing Screens Revision May, 2010 3-135 Property Description of Range Indicator Element Foreground Color Style (Please refer to Table 3-8-2 Property Description of General Buttons.) Add/Remove State It is used to set the state numbers of range indicator. 1~256 states can be set. Detail Data Length: There are 16bits Word and 32bits Double Word two options. Memory Format: here are following data format provided: Word/Double Word 1. BCD 2. Signed BCD 3. Signed Decimal 4. Unsigned Decimal Range Constant Limits Selecting this option can use default 5 states to set the range. If there is n numbers of states, it indicates that there is Range n-1 for the user to use.
The user can specify the foreground color of state 0, 1, 2, 3, and 4 as red, green, blue, yellow and purple respectively. Range 0 Range 1 Range 2 Range 3 100 50 33 1 When the value of read address is higher than 100, the range indicator will display in red. When the value of the read address is higher than 50, the range indicator will display in green, and vise versa. Variable Limits When this option is selected, there is Range n-1 for the user to use. n represents the total state numbers and n-1 represents the total range numbers. For example, if the read address is $0, and the total state number of the element is 5, it indicates that there is Range 0~4 for the user to use.
Then, the lower limit value of Range 0 is $1, the lower limit value of Range 1 is $2 and vise versa.