Chapter 3 Creating and Editing Screens 3.8.8 Data Display Elements Fig. 3-8-25 Data Display Elements 3.8.8.1 Numeric Display Revision May, 2010 3-137 Property Description of Numeric Display Element This element will read the value of the setting address and display the read value immediately in the format set by the user. Read Address The address can be internal memory or the controller address. (Please refer to Table 3-8-2 Property Description of General Buttons.) Text Size Text Color The user can set the text size and text color that provided by HMI to determine the text display on the element. HMI provides 8~64 kinds of default text font for the user to use.
Border Color Background Color Border Color option can be set only when the style of the numeric display element is selected as Raised and Sunken. The style of the element below is selected as “Sunken”. Its background color is set to green and its border color is set to red. (If the style of the element is set to Transparent, the Border Color and Background Color these two options are disabled.) Style Standard Raised Sunken Transparent Leading Zero The following figures show the difference if the user selects the Leading Zero option. (Please note that the integral digit is set to 4 digits.) (If YES is selected) (If NO is selected)