Mitsubishi — 3.8.8.1 Numeric Display

Chapter 3 Creating and Editing Screens 3-138 Revision May, 2010 Property Description of Numeric Display Element Setting Date Length There are 16bits Word and 32bits Double Word two options. Data Format There are following data format provided: Word Double Word 1. BCD 1. BCD 2. Signed BCD 2. Signed BCD 3. Signed Decimal 3. Signed Decimal 4. Unsigned Decimal 4. Unsigned Decimal 5. Hex 5. Hex 6. Binary 6. Binary 7. Floating Integral Digits Fractional Digits Use this option to determine the digit number of integer and decimal fraction. The digit number (Fractional Digits) here is not a real decimal value. It is only the display format.

The digit number will be a real decimal only when the data format is selected as “Floating”. Gain (a) Offset (b) Round off The user can use y = (a) x (read address value) + (b) this equation to determine the display numeric value (y). For example, if Gain value (a) is 2 and Offset value (b) is 3, when the read address value is 3, then the display numeric value will be equal to (2) x 3 + (3) = 9. If Gain and Offset value is a decimal, please set the data format as “Floating”. If Round off option is selected, after the operation of the equation above, all numeric values can be rounded off and display on the screen.