Chapter 3 Creating and Editing Screens 3.8.8.2 Character Display Revision May, 2010 3-139 Property Description of Numeric Display Element Fast Refresh If this option is selected, the element can be displayed immediately when switching the screen. Please note that this function is designed to provide fast value refresh speed for the element which performs communication frequently. Therefore, only 4 elements (including display element and input element) can be fast refreshed on one screen. If the user uses this function on too many elements, it may affect the normal speed of HMI operation. So, we recommend the user not to activate this function if not necessary.
The user can set the Fast Refresh Rate by clicking Screen > Screen Properties command. There are three levels of the Fast Refresh Rate and they are High, Medium and Low. X Used to set X coordinate Y Used to set Y coordinate Width Used to set the element width Height Used to set the element height Property Description of Character Display Element The user can use this element to read the value of the specific address, convert them to text or character and display on the screen. The read value must be in ASCII format or the user cannot see the display text or character. (The max. string length is 28words.) Read Address The address can be internal memory or the controller address.
(Please refer to Table 3-8-2 Property Description of General Buttons.) Text Size Text Color The user can set the text size and text color provided by HMI to determine the text display on the element. HMI provides 8~64 kinds of default text font for the user to use. Style (Please refer to Table 3.8.2 Property Description of Numeric Display Element.) Border Color Background Color (Please refer to Table 3.8.2 Property Description of Numeric Display Element.)