Chapter 3 Creating and Editing Screens 3-140 Revision May, 2010 Property Description of Character Display Element String Length The range is with 1 ~ 28 words. Set the read address as Internal Memory 0, i.e. $0, set the string length to 6, and create three Numeric Entry elements. Then, set the data format of these three Numeric Entry elements as hexadecimal and enter the value as follows: $0 = 4241(Hex) $1 = 4443(Hex) $2 = 4645(Hex) Then, the above screen will display. Please note that character display element reads the Byte value, and the data length of the internal memory $ address is Word, which is composed of two Bytes. Therefore, one Word can represent two Bytes.
However, as the high byte and low byte of the value that read by the character display element will be exchanged, when reading the Internal Memory $0 (=4241 (Hex)), the real display character will become “AB” and vise versa. Please refer to the following table. ASCII Code / Hex Cross Reference ASCII Hex A 41 B 42 C 43 D 44 E 45 F 46 ASCII Code / Hex Cross Reference ASCII Hex A 41 B 42 C 43 D 44 E 45 F 46