Chapter 3 Creating and Editing Screens 3.8.9 Graph Display Elements Fig. 3-8-26 Graph Display Elements 3.8.9.1 State Graphic Revision May, 2010 3-145 Property Description of Static Graphic Element When HMI is connected to the controller, the user can create static graphic elements to read the value of several read addresses controlled by the controller. The read value of each state can be converted and transmitted to the static graphic elements and display respectively on the HMI screen. Read Address The address can be internal memory or the controller address.
(Please refer to Table 3-8-2 Property Description of General Buttons.) Bank (Picture Bank) Picture Name (Please refer to Table 3-8-2 Property Description of General Buttons.) Transparent Effect Transparent Color (Please refer to Table 3-8-2 Property Description of General Buttons.) Foreground Color (Please refer to Table 3.2.2 Property Description of Numeric Display Elements.) Data Length Bit It can have two states. Word It can have 256 states. LSB It can have 16 states. Data Format It provides BCD, Signed Decimal, Unsigned Decimal and Hex four kinds of data format to define the read memory content. Add/Remove State It is used to set the state numbers of static graphic element.
If the data length of the value is in Word, 1~256 states can be set. If the data length of the value is in LSB, 16 states can be set. If the data length of the value is in Bit, only 2 states can be set.