Mitsubishi — 3.8.9.3 Dynamic Line

Chapter 3 Creating and Editing Screens 3.8.9.3 Dynamic Line Revision May, 2010 3-149 Property Description of Dynamic Line Element The dynamic line element can be changed and moved depending on the value of the corresponding contact or register. Read Address The address can be internal memory or the controller address. (Please refer to Table 3.2.2 Property Description of General Buttons.) Read Address The value of the Read Address can be used only when Variable Position option is set to Yes. It is used to represent the left-top horizontal position (Left) of the element, i.e. the first X coordinate on the screen (X ).

1 Read Address +1 The value of the Read Address+1 can be used only when Variable Position option is set to Yes. It is used to represent the left-top vertical position (Top) of the element, i.e. the first Y coordinate on the screen (Y ). 1 Read Address +2 The value of the Read Address+2 can be used only when Variable Position option is set to Yes. It is used to represent the right-bottom horizontal position (Right) of the element, i.e. the second X coordinate on the screen (X ). 2 Read Address +3 The value of the Read Address+3 can be used only when Variable Position option is set to Yes. It is used to represent the right-bottom vertical position (Bottom) of the element, i.e.

the second Y coordinate on the screen (Y ).. 2 Read Address +4 The value of the Read Address+4 can be used only when Variable Color option is set to Yes. It is used to represent the line color. The range is different depending on selected HMI. The range for 16 shades of gray model is within 0 ~ 15, the range for 256 colors model is within 0 ~ 255 and the range for 65536 colors is within 0 ~ 65536. Read Address +5 The value of the Read Address+5 can be used only when Blink option is set to Yes. When the value is higher than 1, the dynamic line element will blink. If the value is 0, it will not blink.