Chapter 3 Creating and Editing Screens Example of Animated Graphic element: The designated read address = D100. The internal memory value and each state should be as follows: State control register D100 Y-axis control register D102 3-148 Revision May, 2010 Property Description of Animated Graphic Element Read Address Read Address Use the value of Read Address to switch the state of animated graphic element. Read Address+1 Use the value of Read Address+1 to be the horizontal axis position of the animated graphic element. Read Address+2 Use the value of Read Address+2 to be the vertical axis position of the animated graphic element.
Bank (Picture Bank) Picture Name (Please refer to Table 3-8-2 Property Description of General Buttons.) Transparent Effect Transparent Color (Please refer to Table 3-8-2 Property Description of General Buttons.) Clear Picture Use this option to clear previous animated graphic element when moving the element or changing the state of the element. Data Length Word It can have 256 states. LSB It can have 16 states. Data Format It provides BCD, Signed Decimal, Unsigned Decimal and Hex four kinds of data format to define the read memory content. Add/Remove State It is used to set the state numbers of animated graphic. If the data length of the value is in Word, 1~256 states can be set.
If the data length of the value is in LSB, 16 states can be set. If the data length of the value is in Bit, only 2 states can be set. X Used to set X coordinate Y Used to set Y coordinate Width Used to set the element width Height Used to set the element height X-axis control register D101