Chapter 3 Creating and Editing Screens Example of Static Graphic element: The designated read address = D100. The internal memory value and each state should be as follows: D100=0 D100=1 D100=2 D100=3 D100=4 3.8.9.2 Animated Graphic Revision May, 2010 3-147 Property Description of Static Graphic Element Transparent If Yes is selected, it indicates that this element will be displayed in transparent color. It is usually used with the transparent color setting of the element. Please refer to the following example elements: The transparent color has not been set yet. The element transparent color has been set. The transparent color of the whole drawing has been set.
Please note that if Yes option is selected (set to Transparent), the foreground color option is disabled. X Used to set X coordinate Y Used to set Y coordinate Width Used to set the element width Height Used to set the element height Property Description of Animated Graphic Element When HMI is connected to PLC, the user can create animated graphic elements to read the value of several read addresses controlled by PLC. The read value of each state can be converted and transmitted to the animated graphic elements and display on the HMI screen. The individual movement and moving position can also be controlled and show on the HMI screen.
Read Address The address can be internal memory or the controller address. (Please refer to Table 3.2.2 Property Description of General Buttons.)