Mitsubishi — 3.8.9.4 Dynamic Rectangle

Chapter 3 Creating and Editing Screens Revision May, 2010 3-151 Property Description of Dynamic Rectangle Element Read Address Read Address +2 The value of the Read Address+2 can be used only when Variable Size option is set to Yes. It is used to represent the right-bottom horizontal position (Right) of the element, i.e. the width. Read Address +3 The value of the Read Address+3 can be used only when Variable Size option is set to Yes. It is used to represent the right-bottom vertical position (Bottom) of the element, i.e. the height. Read Address +4 The value of the Read Address+4 can be used only when Variable Color option is set to Yes. It is used to represent the line color.

The range is different depending on selected HMI. The range for 16 shades of gray model is within 0 ~ 15, the range for 256 colors model is within 0 ~ 255 and the range for 65536 colors is within 0 ~ 65535. Read Address +5 The value of the Read Address+5 can be used only when Blink option is set to Yes. When the value is higher than 1, the dynamic line element will blink. If the value is 0, it will not blink. Please note that when Variable Position option is set to No, the internal memory address of Variable Size option will increase one (one increment) automatically. (Read Address will represent the right-bottom horizontal position (Right) of the element.

Read Address+1 will represent the right-bottom vertical position (Bottom) of the element. Read Address+2 will represent the foreground color of the element.) Blink The element can blink to remind the user. (Please refer to Table 3-8-2 Property Description of General Buttons.) Foreground Color Used to set the foreground color of the dynamic rectangle element. Line Size The unit is Pixel and the range is within 1 ~ 8. Data Format It provides BCD, Signed Decimal, Unsigned Decimal and Hex four kinds of data format to define the read memory content.