Mitsubishi — 3.8.9.5 Dynamic Ellipse

Chapter 3 Creating and Editing Screens 3.8.9.5 Dynamic Ellipse 3-152 Revision May, 2010 Property Description of Dynamic Rectangle Element Transparent When this option is selected, the element will display only with the border and there is no color in the element. The Foreground Color option will be disabled also. Round Radius 0~38 pixels round radius are provided for selection.

Variable Position (Please refer to the description of Read Address above) Variable Size (Please refer to the description of Read Address above) Variable Color (Please refer to the description of Read Address above) X Used to set X coordinate Y Used to set Y coordinate Width Used to set the element width Height Used to set the element height Property Description of Dynamic Ellipse Element The dynamic ellipse element, including element size and color can be changed and moved depending on the value of the corresponding contact or register. Read Address The address can be internal memory or the controller address.

(Please refer to Table 3.2.2 Property Description of General Buttons.) Read Address The value of the Read Address can be used only when Variable Central Point option is set to Yes. It is used to represent the horizontal position of the element center point, i.e. the first X coordinate on the screen (X ). 1 Read Address +1 The value of the Read Address+1 can be used only when Variable Central Point option is set to Yes. It is used to represent the vertical position of the element center point, i.e. the first Y coordinate on the screen (Y ). 1 Read Address +2 The value of the Read Address+2 can be used only when Variable Radius option is set to Yes.

It is used to represent the horizontal radius of the element, i.e. the width.