Chapter 3 Creating and Editing Screens 3.8.11.2 X-YChart Revision May, 2010 3-171 Property Description of Trend Graph Elements Setting Line Size Used to the display line width. The range is within 1 ~ 8 and the unit is pixel. Line Color Used to set the display line color. Grid Line Color Grid Number in Horiz. Please refer to the figure below. The grid color is set to red and the grid number in horizontal direction is set to 3. X Used to set X coordinate Y Used to set Y coordinate Width Used to set the element width Height Used to set the element height Property Description of X-Y Chart Elements HMI will read and convert a series value of setting address to a X-Y chart on the screen.
This function is used to read the values of the internal memory addresses and display on HMI screen statically. After setting, the user needs to set the specific address of the control block to trigger the drawing and clear operation of the trend graph, i.e. Trend Draw and Trend Clear. For the settings of the control block, please refer to section 3.4 in Chapter 3. Border Color Background Color Border Color option can be set only when the style of the X-Y chart element is selected as Raised and Sunken. The style of the element below is selected as “Raised”. Its background color is set to yellow and its border color is set to gray.
Style Standard Raised Sunken Connect Two Points If Yes option is selected, when drawing the X-Y chart on the screen, the space between two points on the X-Y chart will be connected by lines. Curve Field Total 1~4 curves can be set and displayed.