Mitsubishi — 3.8.11.2 X-YChart

Chapter 3 Creating and Editing Screens Revision May, 2010 3-173 Property Description of X-Y Chart Elements Setting Sample Number Max. Sample Number Please note that when the sample number is a constant, the Max. Sample Number option is disabled. When Sample Number is a variable value: When the sample number is set to the address (register), the sample number is a variable value. The user can change the value of the address to modify the sample number at the same time. When the sample number is a variable value, the Max. Sample Number option must be set. If the read value is more than the set Max. Sample Number, the system will take the set Max.

Sample Number as the actual maximum sample number. Data Format Word 1. BCD 2. Signed BCD 3. Signed Decimal 4. Unsigned Decimal 5. Hex Horiz. Read Address The address can be internal memory or the controller address. (Please refer to Table 3.2.2 Property Description of General Buttons.) The X-Y chart will continuously read numbers of addresses from the horizontal read address set by the user, convert the read data into the points of X-axis and display on HMI screen. The numbers of the addresses is determined by the setting of “Sample Number”.